Triton X-SCALE/X2 Configuration Manual Manual de usuario Pagina 57

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 419
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 56
47
DIAGNOSTICS
CONFIGURE MODEM / TRITON CONNECT SETTINGS
ACCESS INSTRUCTIONS:
1. From the D
IAGNOSTICS screen, select the MODEM/ETHERNET option by pressing <7> on the keypad.
2. From the MODEM/ETHERNET screen, select the CONFIGURE MODEM option by pressing <4> on the
keypad.
3. From the M
ODEM/ETHERNET screen, select the TRITON CONNECT SETTINGS option by pressing <5> on
the keypad.
Press the <CLEAR> key until the parameter that will be configured is highlighted.
If the parameter is enabled (checked), highlight the parameter and press the <CTRL> key to place or
remove a check from the box. If the parameter is selected from a list of choices, use the <CLEAR> key to
highlight the parameter and the Right (>) and Left (<) arrow keys to display the desired parameter.
P
ORT SETTINGS
***WARNING***
Do not attempt to alter any of the following parameters unless you are abso-
lutely certain of the result. If incorrectly set, some of these parameters can cause
communication failure.
D
ESCRIPTION:
The C
ONFIGURE MODEM and TRITON CONNECT SETTINGS functions allow changing the modem parameters.
Pressing the applicable key (<4> for Configure Modem or <5> for Triton Connect Settings) will display the
Select Modem dialog. The name of the modem that will be configured is shown in the dialog.
Press the <CLEAR> key on the keypad until the “CONFIGURE button is highlighted. Press the <ENTER>
key. The device properties screen is now displayed.
Vista de pagina 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 418 419

Comentarios a estos manuales

Sin comentarios